Технические характеристики:
Technical Information
Application/Usage: Switching Network
Interfaces/Ports
Interfaces/Ports: 16 x 1000Base-T LAN
Interfaces/Ports Details: 16 x RJ-45 1000Base-T LAN
Media & Performance
Connectivity Media: Category 5 UTP
Distance Supported: 328.08 ft Category 5 UTP
Data Transfer Rate: 1 Gbps Gigabit Ethernet @ 328.08 ft
Management & Protocols
Management:
ETHERLIKE-MIB (RFC 1643)
IF-MIB (RFC 1573)
Bridge MIB (RFC 1493)
CISCO-STACK-MIB
CISCO-VTP-MIB
CISCO-CDP-MIB
RMON MIB (RFC 1757)
CISCO-PAGP-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-VLAN-BRIDGE-MIB
CISCO-VLAN-MEMBERSHIP-MIB
ENTITY-MIB (RFC 2037)
HC-RMON
RFC1213-MIB (MIB-II)
SMON-MIB
Protocols: STP
Protocols: VRRP
Protocols: HSRP
Memory
Memory: 512 KB Buffer Memory Per Port Installed
Controls/Indicators
Status Indicators:
Status
Link good
Reliability
MTBF: 61360.69 Hour
Environmental Conditions
Temperature: -40�F (-40�C) to 167�F (75�C) Storage
Temperature: 32�F (0�C) to 104�F (40�C) Operating
Humidity: 10% to 90% Non-condensing Relative Humidity
Altitude: -196.84 ft to 13123.32 ft Operating
Physical Characteristics
Dimensions: 1.2" Height x 14.4" Width x 16.0" Depth
Additional Information:
Primary Applications: Base server farm
Interface Module Class: Classic
Performance maximum (Mpps): 15
Forwarding engine/location: Centralized CEF Engine; located on supervisor engine's PFCx
Fabric connections: 32 Gbps shared bus connection (on Supervisor Engine 1A, Supervisor Engine 2, and Supervisor Engine 720)
Scheduler: Weighted Round Robin (WRR)
Classic interface modules do not support distributed forwarding and cannot be upgraded with a Distributed Forwarding Card (DFC)
Suited for wiring closet applications, Classic interface modules use the supervisor engine for centralized Layer 2 and Layer 3 forwarding, and forward packets up to 15 Mpps over a 32-Gbps shared bus
Queues per Port (Tx = Transmit, Rx = Receive):
Tx-1p2q2t
Rx-1p1q4t
- Queues Legend: 1p2q2t = 1 priority queue, 2 round robin queues, 2 thresholds
Port Density/Chassis Model:
192 ports (Cisco Catalyst 6513)
128 ports (Cisco Catalyst 6509)
System Requirements: Slot requirements:
None; can occupy any slot in any Cisco Catalyst 6500 Series chassis
Compatibility:
Cisco Catalyst 6500 Series
Supervisor engine supported:
Supervisor Engine 1A
Supervisor Engine 2
Supervisor Engine 720
Certifications & Standards: Standard Protocols:
IEEE 802.1d
IEEE 802.1p
IEEE 802.1q
IEEE 802.1s
IEEE 802.1w
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ab
IEEE 802.3ad
Safety Compliance:
UL 1950
CSA C22.2 No.950
EN 60950
EN 60825-1
IEC 60950
IEC 60825-1
TS 001
CE marking
AS/NZS 3260
21CFR1040
EMC Compliance:
FCC Part 15 (CFR 47) Class A
VCCI
EN55022
EN55024
CISPR 22
CE marking
AS/NZS 3548
Application/Usage: Switching Network
Interfaces/Ports
Interfaces/Ports: 16 x 1000Base-T LAN
Interfaces/Ports Details: 16 x RJ-45 1000Base-T LAN
Media & Performance
Connectivity Media: Category 5 UTP
Distance Supported: 328.08 ft Category 5 UTP
Data Transfer Rate: 1 Gbps Gigabit Ethernet @ 328.08 ft
Management & Protocols
Management:
ETHERLIKE-MIB (RFC 1643)
IF-MIB (RFC 1573)
Bridge MIB (RFC 1493)
CISCO-STACK-MIB
CISCO-VTP-MIB
CISCO-CDP-MIB
RMON MIB (RFC 1757)
CISCO-PAGP-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-VLAN-BRIDGE-MIB
CISCO-VLAN-MEMBERSHIP-MIB
ENTITY-MIB (RFC 2037)
HC-RMON
RFC1213-MIB (MIB-II)
SMON-MIB
Protocols: STP
Protocols: VRRP
Protocols: HSRP
Memory
Memory: 512 KB Buffer Memory Per Port Installed
Controls/Indicators
Status Indicators:
Status
Link good
Reliability
MTBF: 61360.69 Hour
Environmental Conditions
Temperature: -40�F (-40�C) to 167�F (75�C) Storage
Temperature: 32�F (0�C) to 104�F (40�C) Operating
Humidity: 10% to 90% Non-condensing Relative Humidity
Altitude: -196.84 ft to 13123.32 ft Operating
Physical Characteristics
Dimensions: 1.2" Height x 14.4" Width x 16.0" Depth
Additional Information:
Primary Applications: Base server farm
Interface Module Class: Classic
Performance maximum (Mpps): 15
Forwarding engine/location: Centralized CEF Engine; located on supervisor engine's PFCx
Fabric connections: 32 Gbps shared bus connection (on Supervisor Engine 1A, Supervisor Engine 2, and Supervisor Engine 720)
Scheduler: Weighted Round Robin (WRR)
Classic interface modules do not support distributed forwarding and cannot be upgraded with a Distributed Forwarding Card (DFC)
Suited for wiring closet applications, Classic interface modules use the supervisor engine for centralized Layer 2 and Layer 3 forwarding, and forward packets up to 15 Mpps over a 32-Gbps shared bus
Queues per Port (Tx = Transmit, Rx = Receive):
Tx-1p2q2t
Rx-1p1q4t
- Queues Legend: 1p2q2t = 1 priority queue, 2 round robin queues, 2 thresholds
Port Density/Chassis Model:
192 ports (Cisco Catalyst 6513)
128 ports (Cisco Catalyst 6509)
System Requirements: Slot requirements:
None; can occupy any slot in any Cisco Catalyst 6500 Series chassis
Compatibility:
Cisco Catalyst 6500 Series
Supervisor engine supported:
Supervisor Engine 1A
Supervisor Engine 2
Supervisor Engine 720
Certifications & Standards: Standard Protocols:
IEEE 802.1d
IEEE 802.1p
IEEE 802.1q
IEEE 802.1s
IEEE 802.1w
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ab
IEEE 802.3ad
Safety Compliance:
UL 1950
CSA C22.2 No.950
EN 60950
EN 60825-1
IEC 60950
IEC 60825-1
TS 001
CE marking
AS/NZS 3260
21CFR1040
EMC Compliance:
FCC Part 15 (CFR 47) Class A
VCCI
EN55022
EN55024
CISPR 22
CE marking
AS/NZS 3548