Модуль Cisco WS-X6716-10T-3C

Модуль Cisco WS-X6716-10T-3C
Артикул: Cisco WS-X6716-10T-3C Цена по запросу   Актуализировать цену

Технические характеристики:

Модуль, 16 портов 10GE (X2), 256k IPv4, 128k IPv6, 128k netflow, 128k reflexive ACL, для Cisco Catalyst 6500 серии

WS-X6716-10GE and WS-X6816-10G-2T/-2TXL Ethernet Module Features

Feature
Description

Ports per module

• 16 ports. Ports are numbered (left to right):

– Top row, odd numbered ports 1 through 15.

– Bottom row, even numbered ports 2 through 16.

• 4 port groups

• Port ranges per port group: 1-4, 5-8, 9-12, 13-16

Port connector type

SC or CX4 depending on the type of X2 transceiver installed in the module port.

Cabling distance

Depends on the X2 transceiver installed in the module port. For X2 transceivers currently supported, refer to the compatibility matrices at the following URL:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

For cabling distance information, refer to the transceiver installation guides at the following URL:

http://www.cisco.com/en/US/products/hw/modules/ps5455/prod_installation_guides_list.html

Buffer size

• Oversubscription mode—90 MB per port group

• Performance mode—200 MB per port

QoS

• Number of egress queues: 8

• Number of ingress queues: 8

• Number of thresholds per egress queue: 2 per queue in oversubscription mode or 4 per queue in performance mode

• Number of thresholds per ingress queue: 4

Maximum frame size

Up to 9216 bytes

Module oversubscription rate

4:1

Supervisor engine support

• WS-X6716-10GE supported on the following supervisor engines:

– Supervisor Engine 720

– Supervisor Engine 720-10GE

– Supervisor Engine 2T (module must be upgraded with either a DFC4-E or DFC4-EXL daughter card)

• WS-X6816-10G-2T/-2TXL supported on the following supervisor engines:

– Supervisor Engine 2T-10GE

Software support

• WS-X6716-10GE

– With Supervisor Engine 720—12.2(33)SXH2

– With Supervisor Engine 720-10GE—12.2(33)SXH2

– With Supervisor Engine 2T (module upgraded with DFC4-E or DFC4-EXL)—12.2(50)SY

• WS-X6816-10G-2T/-2TXL

– With Supervisor Engine 2T-10GE—12.2(50)SY

Queues per port

• Oversubscription mode:

– Tx—1p7q4t per port group

– Rx—1p7q2t per port

• Performance mode:

– Tx—1p7q4t per port

– Rx—8q4t per port

Chassis/slot restrictions

• Not supported in the Catalyst 6503 chassis.

• Supported only in slots 9-13 in the Catalyst 6513 chassis and does not power up in slots 1-8.

• When the WS-X6716-10G module is installed in a Catalyst 6500 E-series chassis or a Catalyst 6509-NEB-A chassis, the configuration is NEBS 3 compliant (chassis supports operating temperatures up to 55°C).

• When the WS-X6716-10G module is installed in a Catalyst 6500 non-E series chassis that is equipped with a fan tray 2 and a 2500 W or larger power supply, the configuration is not NEBS 3 compliant (chassis supports operating temperatures up to 40°C only).

• Support in the Catalyst 6509-NEB-A chassis requires two FAN-MOD-09 fan trays.

• WS-X6816-10G-2T/-2TXL is supported only in Catalyst 6500 E-series switches equipped with a Supervisor Engine 2T.

• Requires that modules be installed in adjacent slots or, if either adjacent slot is unused, you must install a switching-module filler plate (Cisco part numbers WS-X6K-SLOT-CVR-E or SLOTBLANK-09) rather than a blank slot cover (WS-X6K-SLOT-CVR) to maintain an adequate air flow through the chassis.

Fabric connection

• Dual switch-fabric connections:

– Fabric channel 1: Ports 1-8

– Fabric channel 2: Ports 9-16

Fabric channel speed

20 Gb/sec (dual channel, 40 Gb/sec total)

Module upgrades available

 

PoE support

Not supported.

Distributed forwarding support

• WS-X6716-10G-3C comes factory-equipped with a DFC3C daughter card.

• WS-X6716-10G-3CXL comes factory-equipped with a DFC3CXL daughter card.

• WS-X6816-10G-2T comes factory-equipped with a DFC4-E daughter card.

• WS-X6816-10G-2TXL comes factory-equipped with a DFC4-EXL daughter card.

Pluggable transceivers support

X2 transceivers are supported. Not all types of X2 transceivers may be supported. For an up-to-date list of supported transceivers, refer to your transceiver compatibility matrices at the following URL.

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

See the  "10-GB Transceivers" section in Appendix B for additional information on the X2 transceivers.

Note  WS-6716-10GE does not support X2 transceivers shipped prior to the release of the WS-X6708-10GE with Cisco IOS Release 12.2(18)SXF5. The unsupported X2 transceivers are labeled with a number that ends with -01. This restriction does not apply to the X2-10GB-LRM transceiver.

Note  Some X2 transceivers shipped prior to the WS-X6716-10GE becoming available might not provide EMI compliance with the WS-X6716-10GE. All X2 transceivers shipped since the WS-X6716-10GE became available provide EMI compliance with the WS-X6716-10GE. See the  "10-GB Transceivers" section in Appendix B for additional information.

Digital Optical Monitoring (DOM) support

Supported on some X2 transceivers.

Note  Refer to your software release notes for specific information on which X2 transceivers support DOM and the software release required for support.

Module front panel LEDs

STATUS

• Green—All diagnostics pass; the module is operational.

• Orange—The module is booting or running diagnostics; an overtemperature condition has occurred.

LINK

• Green—The port is active (the link is connected and operational).

• Flashing orange—The port failed diagnostics and is disabled.

• Orange—The port is disabled.

• Red—The module is resetting; an overtemperature condition has occurred.

Note  If the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online.

• Off—The port is not active or the link is not connected.

WS-X6716-10GE and WS-X6816-10G-2T/-2TXL Ethernet Module Physical and Environmental Specifications

Item
Specification

Dimensions

1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis.

Weight

13.6 lb (6.16 kg) (Excludes weight of X2 transceivers)

Power and heat numbers

• WS-X6716-10G-3C (base module + the DFC3C daughter card)—10.9 A

– Module power—457.80 W

– AC-input power—572.25 W

– AC heat dissipation—1954.23 BTU/hour

– DC-input power—615.32 W

– DC heat dissipation—2101.33 BTU/hour

• WS-X6716-10G-3CXL (base module + the DFC3CXL daughter card)—11.6 A

– Module power—487.20 W

– AC-input power—609.00 W

– AC heat dissipation—2079.74 BTU/hour

– DC-input power—654.84 W

– DC heat dissipation—2236.27 BTU/hour

• WS-X6816-10G-2T (base module + the DFC4-E daughter card)—11.63 A

– Module power—488.46 W

– AC-input power—610.58 W

– AC heat dissipation—2085.11 BTU/hour

– DC-input power—656.53 W

– DC heat dissipation—2242.06 BTU/hour

• WS-X6816-10G-2TXL (base module + the DFC4-EXL daughter card)—11.99 A

– Module power—503.58 W

– AC-input power—629.48 W

– AC heat dissipation—2149.66 BTU/hour

– DC-input power—676.85 W

– DC heat dissipation—2311.46 BTU/hour

Environment

 
 

Operating temperature

• Certified for operation: 32° to 104°F (0° to 40°C)

• Designed and tested for operation: 32° to 130°F (0° to 55°C)

Humidity (RH) ambient (noncondensing)

10 to 90%

Operating altitude

• Certified for operation: 0 to 6500 ft (0 to 2000 m)

• Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m)

Telegram-запрос