Cisco SA-VAM2+
Артикул: SA-VAM2+ Цена по запросу
Актуализировать цену

Технические характеристики:

Manufacturer:

Cisco

Product ID:

SA-VAM2+

Product Description:

AES wide key crypto card

Product Type:

VPN Acceleration Module

Application/Usage:

Security

Protocols:

L2TP

 

IPSec

 

IPPCP

 

GRE

Security Features:

AES 128-bit

 

DES 56-bit

 

3DES 168-bit

 

SHA-1

 

MD5 public-key algorithm

 

Diffie-Hellman key exchange RC4-40

 

RSA

 

IPSec

 

VPN Tunnel

 

IKE

 

ISAKMP

Status Indicators:

·  Enable

·  Boot

·  Error

Additional Information:

·  The SA-VAM2 supports online insertion and removal (OIR)

·  Removing an SA-VAM2 while traffic is flowing through the ports can cause system disruption

·  The Cisco 7301 router supports a single SA-VAM2 in the port adapter slot

·  The Cisco 7200 series routers support up to two SA-VAM2 cards

·  A-VAM2 cards can interoperate with port adapters supported on the Cisco 7200 chassis with the NPE-225, NPE-400, or NPE-G1 processor, or the NSE-1 services accelerator

·  When installing two SA-VAM2s on the Cisco 7200 series routers, per packet load balancing is not supported

·  128-bit Advanced Encryption Standard (AES) in hardware and 192/256 bits in HSP software

·  56-bit Data Encryption Standard (DES) standard mode: Cipher Block Chaining (CBC)

·  Performance to OC3 full duplex with 300 byte packets

·  5000 tunnels for DES/3DES/AES

·  Provides compression with IPSec at no extra overhead

·  Hardware-based compression: Layer 3 IPPCP LZS

Interoperability Between ISA, SA-VAM, and SA-VAM2:

·  SA-VAM2 with ISA:

·         Supports MPPE

·         Supports ISAKMP/IPSec

·  SA-VAM2 with SA-VAM:

·         Does not support MPPE

·         Supports ISAKMP/IPSec

·  SA-VAM2 with SA-VAM2:

·         Does not support MPPE

·         Supports ISAKMP/IPSec

System Requirements:

SA-VAM2 Software Requirements:

·  Cisco 7200 series router:

·         Cisco IOS Release 12.3(1)M or a later release of Cisco IOS Release 12.3M

·         Cisco IOS Release 12.2(14)SU or a later release of Cisco IOS Release 12.2(14)SU

·  Cisco 7301 router:

·         Cisco IOS Release 12.3(3) or a later release of Cisco IOS Release 12.3M

·         Cisco IOS Release 12.3(2)T1 or a later release of Cisco IOS Release 12.3T1

Compatibility:

·  Platform support: Cisco 7200 Series with NPE G1, NPE-400, NPE-225, or NSE-1 processors

·  Cisco 7301 Router in the port adapter slot