Технические характеристики:
| oftware release | Junos OS releases 14.1R4, 14.2R3 with Junos Continuity and Junos OS release 15.1 and later Refer to MIC/MPC Compatibility for information about which MICs are supported on this MPC. Refer to the JTAC Knowledgebase article https://kb.juniper.net/KB21476 for recommended software releases. |
| Description | 80 Gbps capacity without hierarchical quality of service (HQoS) Requires high-capacity fan trays and high-capacity filter trays Weight: 15.96 lb (7.26 kg) Model numbers: MPC2E-3D-NG Name in the CLI: MPC2E NG PQ & Flex Q Add-on license provides limited additional flexible queuing. Note: MPC2E-3D-NG is not compatible with SCB, you must use either SCBE-MX or SCBE2-MX for the switch fabric interface. |
| Hardware features | Line-rate throughput of up to 80 Gbps Supports WAN-PHY mode at 9.95 Gbps and LAN-PHY mode at 10.31 Gbps Two slots for MICs Junos Trio chipsets for increased scaling for bandwidth, subscribers, and services. Note: MPC2E-3D-NG does not support MIC3-3D-10XGE-SFPP, MIC3-3D-1X100GE-CFP, MIC3-3D-1X100GE-CXP, and MIC3-3D-2X40GE-QSFPP. Note: The non-HQOS MPC3E NG and MPC2E NG MPCs support MIC-3D-8CHOC3-4CHOC12 and MIC-3D-4CHOC3-2CHOC12 only with a limited queuing license. |
| Software features | Chained composite next hops Layer 3 VPN localization Detection of Layer 2 loops Entropy label support in mixed mode SNMP and CLI support for Routing Engine memory monitoring Mixed-mode LAG support on core interfaces Dynamic power management for MICs Support for flexible-queuing See Protocols and Applications Supported by the MX240, MX480, MX960, MX2010, and MX2020 MPC2E for information about the protocols and applications that this MPC supports. |
| Power requirement | Maximum with highest-power MICs at 55° C: 9.88 A @ 48 V (474 W) At different temperatures: 55° C: 474 W 40° C: 417 W 25° C: 400 W |
| LEDs | OK/FAIL LED, one bicolor: Steady green—MPC is functioning normally. Blinking green—MPC is transitioning online or offline. Red—MPC has failed. |