Steady green—Installed power supplies are functioning normally.
Steady amber—Only one power supply is functioning normally.
Unlit—No power from either power supply.
On a slave SCE8000-SMC_E module (in the second slot), this LED is always off.
Status
The Status LED indicates the operational status of the Cisco SCE8000 system, as follows:
Unlit—No power from either power unit.
Steady amber—System is booting up.
Flashing amber—System is operational, but is in a warning state.
Flashing green—System is fully operational.
Steady red—Problem or failure.
Alarms are hierarchical: Failure takes precedence over Warning, which takes precedence over Operational.
Optical Bypass
Steady amber—The optic bypass module is directed to pass traffic through the Cisco SCE8000.
Unlit—The optic bypass module (if present) connects link fibers directly, and traffic bypasses the Cisco SCE8000.
On a slave SCE8000-SMC_E module (in slot 2), this LED is always off.
This functionality is consistent even when the Cisco SCE8000 is powered off.
Master
Indicates the master service control module
Steady green—Master service control module
Unlit—Slave service control module
Mng interface
The Mng interface LEDs indicate the operational status of the Cisco SCE8000 out-of-band LAN-based management port, as follows:
Link/Active
Steady green—Port link is up
Flashing green—Activity on the port link
Unlit—Port link is down
Speed
Unlit—Port is set to 10 Mbps
Steady green—Port is set to 100 Mbps
Steady amber—Port is set to 1000 Mbps
On a slave SCE8000-SMC_E module (in the second slot), this LED is always off.
Корзина
×
Сайт использует файлы cookies и сервис сбора технических данных его посетителей.
Продолжая использовать данный ресурс, вы автоматически соглашаетесь с использованием данных технологий. Подробнее...